2024 Hustler Equipment Rebalers Ez Remote Base

2024 Hustler Equipment Rebalers Ez Remote

Tease apart your large round bales in less than 5 minutes to convert them into small square bales! Make your rebaling operation more efficient and more profitable with huge time, labour cost and fuel savings.

Add an EZ Remote hydraulic control arm to any Hustler mounted machine, these are developed specifically for the use of rebaling, breaking down bales for mixer wagons, and processing hemp, providing huge savings in both time and diesel.

There are many time, storage and cost saving benefits of producing large round bales in the paddock then converting them to small squares, on demand which are more salable and higher value. It may sounds like just extra effort and time, but rebaling grass and straw proves a profitable trend for many producers.

• Increase the value of your feed

A small square baler can be driven at only 3-4 mph while a large round baler can be driven up to 10 mph! Not to mention that picking up the small balls requires additional handling…

You need a crew of about six to bale and stack ten acres of hay in one day. With round bales, three or four people could very easily cover 15 acres in one day.

Rebaling can be a one-man operation if you wanted it to be. With a Hustler Ez Remote coupled to a 100% hydraulically-driven Hustler bale processor, you need only one tractor – the PTO is used to operate the baler while the hydraulics are used to operate the bale processor.

All producers know that harvesting hay can be a tricky business. In years when the weather is unpredictable, you may have only a few days to harvest all your hay fields and it is a true challenge to get the hay cut, dried, raked, and baled and into the barn before wet weather.

Rebaling can be achieved any time of the year, during less busy periods or during winter when the demand for hay is high!

Features may include:

Thanks to the 1.6m (5.2ft) long-mounted arm, the operator can control the levers being outside of the dust zone when rebaling

The Ez remote control valve can be positioned within a 160-degree arc to suit individual operator preference.

By standing back from the operation thanks to the long-mounted arm, you have an excellent visibility of the processor, feed flow and baler, allowing you to quickly and accurately adjust your job.